 |  |  |  |
|---|---|---|---|
 |  |  |  |
 |  |  |  |
 |  |  |
MAKING THEM PRINTABLE FOR EVERYONE
ZWERKZ CONCEPT
Print it, sail it!
​
​
ABOUT ZWERKZ CONCEPT
Push limits with new concepts and technology
ZWERKZ started after the first project footy prototype with 3D printing. And from there onwards we have been working with few designs and testing methods to improve the connecting sections and better shell strength for the hulls.
OUR PRODUCTS
IOM MANTA 2017 3D
​
Designed by Andreas Hoffmann
​
The original design was done in Freeship by Andreas and we have modelled it according to our flavour giving some twist to the deck design. We have model it to use with MX Component keel and rudder.
​
RG65 MANTA 3D
Test printed with Colorfabb XT-CF20.
This design was done by Andreas as well and it has been tested with ColorFabb XT-CF. Make sure your printer calibrated properly before printing and use hardened steel nozzle.
If you do not have hardened steel nozzle it's time for upgrade!
​
RG65 ORION EDGE Zwerkz Remix (OeZ)
Finally it's here and we are satisfied with the design.
This original design came from Swan Sails (Roland) and we thought it should be in our catalogue as well. Hull requires roughly around 10hours, internal parts such as servo tray, rudder post, sail servo tray, keel box included and need roughly about 3-4 hours to print them out. And best part is the bumper requires only 20 minutes to print.
​
IOM HESTIA (Our first home grown)
Give us some time and we'll do the best that we can to make it looks better and sail better ;)
We have been working with this model right after the release of our IOM Manta 2017. It's almost ready and we are revising the keel box to use with the best keel and rudder from Craig Smith.
​
Red5 Racing Edition (Mark Dicks Design)
Finally we are happy with the final release and the
files are ready!
We have been working with this model since the very beginning of Zwerkz Concept and it was our first project with Mark.
Contact us for more info.
​
​
IOM VISIONARY 3D
​
Designed by Mark Dicks
​
The beautiful and unique hull lines is by Mark Dicks and we have been working hard on providing the 3D model to be able to accept Dave Creed's and Craig Smith's keel and rudder.
​
IOM MANTA EXTREME 3D
​
Yet another stunning fast looking hull from Andreas make us proud. We have only made a version for Craig Smith's keel and rudder. The servo box is able to accept HS-5086WP or equivalent size and it will our standard servo with inverted servo box mount .
Designed by Andreas Hoffman
​
CONTACT US
Interested in making some adjustment to the current design? Drop us a message and we will get back to you as soon as we can.
Email: